Tweaks to Avoid FirmWare Destroy of your bm622

This is for Advance level only Definitely NOT for beginners!!!

What is Config Tweaking for?
-To avoid blank WAN cause by other users.
-Prevents your MAC from being stolen.
-Ease of use, say bye bye to Password generators.
-Theoretically blocks the FWD (Firmware Destroyer)

Tweaking your modem’s config is dangerous and risky, it might render your modem useless or brick it so proceed with caution.
Continuing through this process means that you’re willing to take the risk and possibly suffer the consequence of bricking your modem.
Try at your own risk! 

Lets start..
Login to your modem’s GUI as admin  (email me your wan mac if you do not have your admin password)

Go to “Maintain” —> “Device” —> “Advance” 

Then click “Download Default Configuration File

and Save it..

Copy your downloaded config to another location to make a back-up (for safety issues)

Now download XML Notepad 2007 about 1.8MB here:

http://www.microsoft.com/en-us/downl…s.aspx?id=7973

Run it
In XML Notepad 2007:
Open the downloadcarconfigfile
Press CTRL+F
Type —> “parameterkey” then press Enter
close the “Find” dialog box
then follow the screenshot:

This image has been resized. Click this bar to view the full image. The original image is sized 901×613.

Next Press CTRL+F
Type —> “userpassword” then press Enter (twice)
close the “Find” dialog box
follow the screenshot:

This image has been resized. Click this bar to view the full image. The original image is sized 906×612.

Next Press CTRL+F
Type —> “telnetpassword
close the “Find” dialog box
follow the screenshot:

This image has been resized. Click this bar to view the full image. The original image is sized 903×611.

Next Press CTRL+F
Type —> “acl
close the “Find” dialog box
follow the screenshot:

This image has been resized. Click this bar to view the full image. The original image is sized 903×615.

Then save and re-upload it back to your modem’s config and we’re done!

How to Enable Wimax’s built in Signal Booster

Alam nyo ba na may built-in booster ang bm622 unit ninyo? Para ma-enable iyon at makasagap ng mas malakas na signal, just follow this tutorial:

Press —> window+R
Type —> cmd  (enter)
Type —> telnet 192.168.1.1  (enter)
Login —> wimax  (enter)
Password —> wimax820 (enter)
Type —> set wimax-sniffer on (enter)
Type —> board reboot (enter)

then wait for your modem to restart

How To Change MAC Address of Wimax BM622

Things needed:

1.  PC
2.  Bm622 (syempre)
3.  Common sense

DO THIS AT YOUR OWN RISK. FOLLOW CAREFULLY SO NOT TO BLANK WAN YOUR UNIT!! 

Click window icon and click Run and type CMD.  This will open the Command Prompt and type the following commands

1.  type: telnet 192.168.1.1 (enter)

2.  login: wimax (enter)

3.  Password: wimax820 (you can’t see this.. it’s invisible) (enter)

4.  type: setallmacaddr 00:22:33:44:55:66 (enter) (sample mac lang iyan, you need to get a working mac address and put it here.)

5.  type restoredef  (press enter and wait for about a minute or two)

Congratulations! You now have free internet access!

Note: you can email me to ask for a working mac address

By aldecruz